A toothpick inside a folding knife is a small, silly idea that almost nobody builds, and CIVIVI has made it the reason to look at the Scarlet Sendy.
Victorinox has tucked a toothpick and a pair of tweezers into the red scales of its Officer's knife for decades. Those two slivers of plastic are the most-used tools on the knife for a lot of owners, and they cost the factory almost nothing. Every other modern folder drops them. Buy a titanium frame lock at any price and you get a blade, a clip and a pivot, and if you want to get a splinter out at lunch you go find a pair of tweezers.

The Scarlet Sendy closes that gap in the least likely package. This is a Ben Petersen design, and Petersen's name sits on the Banter and Baby Banter, the knives that taught CIVIVI how to build a small folder that still fills an adult hand. The Baby Banter runs a 2.34-inch blade. The Sendy frame stretches that to 2.74 inches, which is the difference between a knife that opens mail and one that cuts an apple in quarters.
CIVIVI mills a channel into each side of the handle. The presentation side carries a steel pair of tweezers, the lock side a steel toothpick, and both sit flush enough that the frame reads as a single piece of ivory G10 from arm's length. Nothing rattles. Nothing protrudes. It is the kind of detail that costs a manufacturer real tooling money and returns almost nothing in a spec sheet.
The blade is the other conversation. CIVIVI lists the finish as red painted, not PVD or Cerakote, and a painted film is the first thing to scuff where the blade rubs the liner on the way open. Expect the red to fade along the plunge and the spine within a season of carry, which is either patina or damage depending on how you feel about a knife that looks used.
What the extra four-tenths of an inch buys
Geometry is where this knife earns its keep. The 2.74-inch blade is a reverse tanto with a straight spine that drops into a short, angled tip, so the point sits low and the cutting edge runs nearly the full length of the blade. Stock is 0.09 inches, thin enough that the flat grind turns the whole blade into a slicer rather than a wedge. Nitro-V at HRC 59 plus or minus one is the same steel CIVIVI uses across its small folders, and it is a sensible pairing at this thickness: nitrogen-alloyed stainless holds a fine edge without the brittleness that makes a thin blade chip.
On the frame side, the numbers are 6.48 inches open, 3.74 inches closed, and 2.51 ounces on a postal scale. The handle is 0.48 inches thick, which is slim for G10 and thin enough that the knife disappears in a front pocket next to a phone. CIVIVI fits a stainless liner lock, caged ceramic bearings on the pivot, and a tip-up clip that mounts on either side for left-handed carry. Deployment runs through a jimped front flipper tab set into the spine at the pivot, visible as a black textured strip on the closed knife. A thumb rolls the tab forward and over, and the caged ceramic bearings carry the blade the rest of the way. There are no thumb studs and no rear flipper, which keeps the closed profile clean in the pocket. Front flippers ask more of the detent than a rear tab does, because the thumb has less leverage, so the break will feel firmer than a Baby Banter's; that is the trade for the silhouette, not a flaw.
| Spec | CIVIVI Scarlet Sendy C26011-1 |
|---|---|
| Overall length | 6.48 in / 164.6 mm |
| Blade length | 2.74 in / 69.6 mm |
| Closed length | 3.74 in / 95 mm |
| Blade stock | 0.09 in / 2.3 mm |
| Steel | Nitro-V, HRC 59 ±1 |
| Blade type | Reverse tanto, flat grind, red painted |
| Handle | Milled ivory G10, 0.48 in thick |
| Lock and pivot | Liner lock, caged ceramic bearings |
| Weight | 2.51 oz / 71.1 g |
| Extras | Steel tweezers, steel toothpick, in-handle storage |

Two details worth flagging before you order. The 2.74-inch blade clears the three-inch limits that most US cities and a long list of European countries write into law, and the ivory G10 will pick up dye from dark denim over a couple of months of pocket time. Neither is a defect, but both are things the product photos will not tell you.
Pre-orders are open at $75.90 through CIVIVI, with an estimated ship date of November 24.