Review Roundup: Benchmade Narrows 748 Gets Blunt Criticism on Price, Not the Blade

Wayne's Sharp World calls the M390 blade the highlight and the $522 package the problem, in the sharpest published takedown of the ultra-thin folder yet.

3 min read
Published:2026-11-05Folding Knives18 ViewsShare:
"I think this is a very nice blade in an overall terrible knife at an offensive price." That sentence, from Wayne Walter of Wayne's Sharp World in a review published on KnifeInformer on November 2, is the most pointed published judgment yet on the Benchmade Narrows 748, and it lands on specifics rather than vibes.

Benchmade Narrows 748 grey titanium folder with blue hardware

The Narrows' defining spec is thinness: 0.08-inch blade stock, about 0.275 inch of 6Al-4V titanium handle, 2.41 ounces listed for an 8.02-inch knife. Walter's sample measured 0.076 inch of blade and a razor edge 0.013 inch behind it, which he calls the sliciest Benchmade he has handled. The revised torsion AXIS crossbar lock drew real praise too, along with the discovery that the thin handle flexes less than expected.

The complaints stack up on the other side of the ledger. His sample arrived with an off-center blade and a blemish on the blue thumb stud's finish. Closed-blade retention is weak enough that he can shake the blade open. Thumb-stud deployment takes deliberate force. The clip is the familiar Bugout-style mini deep-carry unit rather than something milled for this design. And the handle's extreme thinness works against it in hand: it feels, in his words, like a flat skipping stone.

How the numbers compare

Walter kept his comparisons American-made, and the price gap is the story. The table pulls his reported figures:

KnifePriceSteelHandle
Benchmade Narrows 748$522M390Thin 6Al-4V titanium
Hogue DekaAbout $120 to $180MagnaCut (his example)G10
Spyderco ShamanAbout $220 (CruWear)CruWearG10
TRM Atom with Ti scalesAbout $40020CVTitanium

Every alternative on that list, he writes, is on par with or better than the Narrows in quality, craftsmanship, and appearance. He also stresses the point is not the brand: he owns and carries a 940, a Mini Adamas, and a modified Bugout, and called the Narrows' blade the highlight of the knife.

What to watch next

The review's practical question is whether Benchmade tightens quality control on a knife whose entire premise is precision thinness, because an off-center blade and a blemished stud on a $522 sample are exactly the failures the design cannot absorb. The smaller Mini Narrows in 20CV is already on the market at a lower price, and it now has a useful benchmark to be measured against.

Walter's conclusion leaves little room: even at $250 he would not buy this example, and for a new EDC buyer he cannot recommend it on the strength of his experience.

—/ 5.0
(No ratings yet)