A titanium backspacer, a set of scales, a hardware kit and a shipping label cost more than most people expect, and on a Paramilitary 2 they can add up to the price of a second knife. Builds get finished in stages for that reason.
The example making the rounds on r/knives this week started as a PM2 Tanto in M4 with a satin blade. It now wears Flytanium scales, copper-colored titanium hardware, a copper backspacer and phosphor bronze washers, and it went to Way of Knife for blade and scale work on top of that.

What the parts run
Flytanium sells a PM2 Tritium Stopper for $91, a titanium backspacer that holds tritium vials sold separately. Scale sets start around $50 for basic G10 or carbon fiber and climb past $150 for machined titanium with contoured patterns. Hardware kits and backspacers sit between those numbers, and the blade work is quoted per job because a regrind or a laser etch is not a shelf item.
| Item | Typical price | Notes |
|---|---|---|
| Flytanium PM2 Tritium Stopper | $91 | Titanium, tritium vials extra |
| Aftermarket scales, G10 or carbon fiber | $50-$100 | Wider model coverage |
| Machined titanium scales | $150 and up | Contoured, patterned |
| Blade and scale work | Quoted per job | Regrind, etch, anodizing |
What the warranty says about it
Spyderco's warranty does not cover knives disassembled by anyone outside its own warranty department, and aftermarket makers say so on their own product pages. Flytanium's listing for the tritium stopper states the part is not produced or endorsed by Spyderco and may void the manufacturer's warranty.
That does not mean the knife becomes unserviceable. It means the company can decline a claim tied to a part it did not install. Owners who keep the factory scales in a drawer have the option of putting the knife back to stock before sending it in, which is the practical reason not to throw them away.
The sharpening service is the part that survives. Spyderco has long charged $5 for return shipping on a factory sharpening, and a modified handle does not change what the edge needs.
Mod build against a stock knife
| Modded PM2 build | Stock knife at the same total | |
|---|---|---|
| Money | Knife plus parts plus labor, in stages | One invoice |
| Warranty | Disassembly excluded | Factory coverage intact |
| Resale | Parts rarely recover their cost | Documented model, documented price |
| Result | Tuned to one owner's hand and taste | Whatever the factory decided |
The comparison is not really about value. A stock knife at $400 and a modded PM2 at $400 are different purchases: one is a tool with a service department behind it, the other is a tool shaped by whoever paid for the parts. Buyers who want a specific blade grind and a specific handle finish cannot get that from a catalog, and buyers who want to send a knife in for service should not build one.
Way of Knife and the scale makers keep taking orders, and the PM2 Tanto keeps showing up in builds because the platform has more aftermarket support than almost anything else in its class. Whether the next one gets assembled this way depends on what the next owner pays for someone else's taste.