Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon0.950-1.100%Carbon — the core element for hardness and edge keenness
CRChromium13.000-14.500%Chromium — provides stainless properties and corrosion resistance
MNManganese0.500%Manganese — deoxidizer that also aids strength
MOMolybdenum0.100-0.300%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
NINickel0.490%Nickel — improves toughness and corrosion resistance
PPhosphorus0.040%Phosphorus — usually controlled as an impurity
SSulfur0.030%Sulfur — improves machinability but reduces toughness
SISilicon1.000%Silicon — deoxidizer used in steelmaking
VVanadium0.100-0.250%Vanadium — forms hard carbides that raise wear resistance and strength

Material Overview

AUS10A is part of the Japanese AUS steel series produced by Aichi Steel Corporation. It is often compared to VG-10 but generally has slightly lower wear resistance while maintaining good toughness and easier sharpening characteristics. AUS-10 provides a balanced and practical performance profile, making it popular in affordable to mid-range knives where ease of maintenance and durability are important.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
6.0
Toughness
7.0
Corrosion Resistance
8.0
Sharpenability
8.0

Advantages

  • Easy to sharpen
  • Good corrosion resistance
  • Solid toughness for daily use
  • Affordable and widely used
  • Reliable for kitchen and EDC applications

Disadvantages

  • Lower edge retention than VG-10 and PM steels
  • Not suitable for heavy-duty cutting tasks
  • Moderate wear resistance
  • Mid-tier performance overall

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Nitro-V
Buderus Edelstahlwerke
58-61HRC8.58.08.09.08.0
154CM
Crucible Industries
58–61 HRC8.57.07.08.08.0
OU-31
Nippon Koshuha
59–61 HRC8.08.08.08.08.0
CMV60
Takefu
59–61 HRC8.07.07.09.08.0

Frequently Asked Questions

What is the typical hardness of AUS10A?

AUS10A typically runs around 59–61 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is AUS10A?

The steel database rates its corrosion resistance at 8.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is AUS10A? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is AUS10A good for?

Typical applications include: Kitchen knives, utility knives, EDC knives, folding knives, light outdoor knives.. Real-world results also depend on heat treatment quality and knife design.