Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon0.670%Carbon — the core element for hardness and edge keenness
CRChromium13.000%Chromium — provides stainless properties and corrosion resistance
MNManganese0.600%Manganese — deoxidizer that also aids strength
PPhosphorus0.025%Phosphorus — usually controlled as an impurity
SSulfur0.015%Sulfur — improves machinability but reduces toughness
SISilicon0.400%Silicon — deoxidizer used in steelmaking

Material Overview

N611 is a Swedish stainless steel developed by Uddeholm, originally engineered for razor blade applications. It is famous for its extremely fine grain structure, which allows it to take very sharp edges while maintaining outstanding toughness. Unlike many modern high-carbide steels, AEB-L prioritizes edge stability and ease of sharpening over extreme wear resistance. This makes it a favorite among custom knife makers and chefs who value clean cutting performance and durability over long edge retention.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
6.0
Toughness
9.0
Corrosion Resistance
9.0
Sharpenability
10.0

Advantages

  • Extremely easy to sharpen
  • Outstanding toughness
  • Very fine grain structure for razor-sharp edges
  • Excellent corrosion resistance
  • Very stable edge behavior

Disadvantages

  • Lower edge retention than PM steels
  • Not designed for heavy abrasive wear
  • Requires more frequent sharpening
  • Limited performance in extreme hard-use cutting

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
AEB-L
Uddeholm
58–62 HRC8.56.09.09.010.0
N-611
Uddeholm
58–62 HRC8.56.09.09.010.0
MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM-MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0

Frequently Asked Questions

What is the typical hardness of N611?

N611 typically runs around 58–62 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is N611?

The steel database rates its corrosion resistance at 9.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is N611? Does it chip easily?

The steel database rates its toughness at 9.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is N611 good for?

Typical applications include: Kitchen knives, slicing knives, EDC knives, fillet knives, fine utility blades.. Real-world results also depend on heat treatment quality and knife design.