Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon0.350%Carbon — the core element for hardness and edge keenness
CRChromium13.500%Chromium — provides stainless properties and corrosion resistance
MNManganese0.500%Manganese — deoxidizer that also aids strength
MOMolybdenum0.600%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
NINickel0.500%Nickel — improves toughness and corrosion resistance
SISilicon0.800%Silicon — deoxidizer used in steelmaking

Material Overview

S-STAR is a high-purity martensitic stainless steel produced by Daido Steel primarily for plastic injection molds and corrosion-resistant tooling. Manufactured using ESR (Electro-Slag Remelting), it features excellent cleanliness, uniform carbide distribution, and superior corrosion resistance compared to conventional stainless steels. Although originally designed as a mold steel, several Japanese knife makers have successfully adapted S-STAR for knife production because of its fine grain structure, toughness, and excellent resistance to staining and rust. In knife applications, S-STAR is often compared to a highly refined version of 420HC or 12C27, prioritizing corrosion resistance and edge stability over extreme wear resistance.

Comparable Steels:

  • S-STAR > 420HC in corrosion resistance and steel cleanliness

  • S-STAR > X46Cr13 (1.4034) in corrosion resistance

  • S-STAR ≈ 12C27 in real-world knife performance

  • S-STAR ≈ AEB-L in toughness and edge characteristics

  • S-STAR < VG-10 in wear resistance

  • S-STAR < CPM-S30V in edge retention

  • S-STAR < MagnaCut in overall performance

  • S-STAR > H1 and LC200N in edge retention, but trails them in corrosion resistance under extreme saltwater conditions

Equivalent / Similar Steels:

  • AEB-L

  • 12C27

  • 14C28N

  • 420HC (high-end heat treated)

  • Böhler N680 (application overlap)

Typical Composition (Approximate):

  • Carbon (C): ~0.38%

  • Chromium (Cr): ~13.5%

  • Molybdenum (Mo): ~0.30%

  • Nickel (Ni): Trace additions

  • Manganese (Mn): ~0.50%

  • Silicon (Si): ~0.90%

Note:
S-STAR is not a conventional knife steel and was originally engineered for high-polish corrosion-resistant mold applications. However, its exceptional cleanliness, stainless properties, and fine-grained structure have made it increasingly popular among Japanese knife makers seeking a highly corrosion-resistant alternative to traditional stainless steels.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
6.0
Toughness
8.0
Corrosion Resistance
9.0
Sharpenability
8.0

Advantages

  • Exceptional corrosion resistance
  • Extremely clean ESR microstructure
  • Fine grain structure
  • Good toughness and edge stability
  • Easy maintenance
  • Easy to sharpen compared to PM steels

Disadvantages

  • Moderate edge retention
  • Lower wear resistance than premium PM steels
  • Less common in the knife industry
  • Performance heavily depends on heat treatment
  • Not optimized for extreme abrasive cutting

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM-MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0

Frequently Asked Questions

What is the typical hardness of S-Star?

S-Star typically runs around 58–62 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is S-Star?

The steel database rates its corrosion resistance at 9.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is S-Star? Does it chip easily?

The steel database rates its toughness at 8.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is S-Star good for?

Typical applications include: Kitchen knives, EDC knives, outdoor knives, corrosion-resistant utility blades, food-processing tools.. Real-world results also depend on heat treatment quality and knife design.