Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon1.200-1.300%Carbon — the core element for hardness and edge keenness
MNManganese0.200-0.300%Manganese — deoxidizer that also aids strength
PPhosphorus0.030%Phosphorus — usually controlled as an impurity
SSulfur0.000%Sulfur — improves machinability but reduces toughness
SISilicon0.100-0.200%Silicon — deoxidizer used in steelmaking

Material Overview

Shirogami #1 (White Paper Steel #1) is one of the purest knife steels produced by Hitachi. Designed to minimize alloying elements, it contains primarily iron and carbon, allowing it to develop an extremely fine grain structure. This purity enables Shirogami #1 to take an extraordinarily sharp edge and makes sharpening remarkably easy compared to most modern steels. Because of its high carbon content, it can achieve very high hardness levels while maintaining excellent cutting feel. It is highly favored by traditional Japanese bladesmiths and professional chefs who prioritize ultimate sharpness over corrosion resistance. However, the lack of chromium makes it highly reactive and prone to rust if not properly maintained.

Comparable Steels:

  • Shirogami #1 > Shirogami #2 in hardness and edge retention

  • Shirogami #1 < Aogami #1 in wear resistance

  • Shirogami #1 < Aogami Super in edge retention

  • Shirogami #1 > 1095 in sharpening ease and edge refinement

  • Shirogami #1 ≈ 52100 in cutting performance, but offers easier sharpening

  • Shirogami #1 < CPM MagnaCut and M390 in corrosion resistance

  • Shirogami #1 remains one of the benchmark steels for achieving the finest possible cutting edge in traditional Japanese knife making.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
8.0
Toughness
8.0
Corrosion Resistance
1.0
Sharpenability
10.0

Advantages

  • Exceptional sharpness potential
  • Extremely easy to sharpen
  • Very fine grain structure
  • Excellent cutting feel and edge refinement
  • High hardness capability
  • Preferred by traditional Japanese craftsmen

Disadvantages

  • Extremely low corrosion resistance
  • Requires constant maintenance
  • Develops patina quickly
  • Can chip at very high hardness levels
  • Not suitable for humid or marine environments

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Aogami Super
Hitachi
63–67 HRC9.510.07.02.07.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0
Aogami #1
Hitachi
62–66 HRC9.09.07.02.08.0
Aoniko
Hitachi
61–65 HRC9.08.08.02.08.0

Frequently Asked Questions

What is the typical hardness of Shirogami 1B?

Shirogami 1B typically runs around 62–66 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Shirogami 1B?

The steel database rates its corrosion resistance at 1.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Shirogami 1B? Does it chip easily?

The steel database rates its toughness at 8.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Shirogami 1B good for?

Typical applications include: Sushi knives, yanagibas, usubas, chef knives, woodworking tools, collector knives, precision cutting applications.. Real-world results also depend on heat treatment quality and knife design.