Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon1.050-1.150%Carbon — the core element for hardness and edge keenness
MNManganese0.200-0.300%Manganese — deoxidizer that also aids strength
PPhosphorus0.030%Phosphorus — usually controlled as an impurity
SSulfur0.000%Sulfur — improves machinability but reduces toughness
SISilicon0.100-0.200%Silicon — deoxidizer used in steelmaking

Material Overview

Shirogami #2 (White Paper Steel #2) is one of the purest carbon steels produced by Hitachi and is considered the foundation of traditional Japanese knife making. Compared to Shirogami #1, it contains slightly less carbon, resulting in improved toughness and easier heat treatment while sacrificing a small amount of maximum hardness and edge retention. Its extremely low alloy content creates a fine grain structure that allows razor-like sharpness and exceptionally easy sharpening. Many Japanese bladesmiths consider Shirogami #2 one of the best steels for experiencing traditional Japanese cutting performance. Due to the absence of chromium, it is highly reactive and requires careful maintenance.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
7.0
Toughness
9.0
Corrosion Resistance
1.0
Sharpenability
10.0

Advantages

  • Extremely easy to sharpen
  • Outstanding sharpness potential
  • Excellent toughness for a high-carbon steel
  • Fine grain structure
  • Exceptional cutting feel
  • Forgiving and easy to heat treat

Disadvantages

  • Extremely low corrosion resistance
  • Requires frequent maintenance
  • Develops patina and rust quickly
  • Lower edge retention than Aogami steels
  • Not ideal for humid or marine environments

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Aogami Super
Hitachi
63–67 HRC9.510.07.02.07.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0
Aogami #1
Hitachi
62–66 HRC9.09.07.02.08.0
Aoniko
Hitachi
61–65 HRC9.08.08.02.08.0

Frequently Asked Questions

What is the typical hardness of Shirogami #2?

Shirogami #2 typically runs around 60–65 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Shirogami #2?

The steel database rates its corrosion resistance at 1.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Shirogami #2? Does it chip easily?

The steel database rates its toughness at 9.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Shirogami #2 good for?

Typical applications include: Chef knives, gyutos, santokus, yanagibas, woodworking tools, bushcraft knives, traditional Japanese blades.. Real-world results also depend on heat treatment quality and knife design.